During this COVID-19 time, inviting plumbers to clear clogged drains may not sound logical, unless it’s too hard to handle by yourself. If you face blocked drains most of your mornings, it’s better to use some easy methods to get the job done. We’re going to discuss four simple methods by using which you can clear the majority of clogged drain without looking for Canberra blocked drains services nearby. Let’s get started.

Four Straightforward methods to clean blocked drains

1. Baking Soda and Vinegar Mix

The combination of baking soda and vinegar is an easy and natural way to unclog drains. When combined, the sodium bicarbonate in baking soda reacts with the molecules (water & acetic acid) of Vinegar. It further creates carbon dioxide and water that helps loosening tough gunk and grease inside the drainpipe.

How to prepare the mixture?

Mix 1/3rd cup of vinegar with the same amount of baking soda. As soon as you mix, it will start to fizz. Without wasting any time, pour the mixture down the drain right away. Let the mixture sit for at least one hour or overnight. Then, pour hot water to complete the last step. That will do the trick.

2. Snake or Eel Tool

The Snake tool is a long flexible metal cable (rope) with metallic spirals at the end. It is highly effective against severe blockages. Slip the device inside the drain and start spinning it rapidly. The metal coil at the cable’s end starts chipping away the blockage, making way for the water to drain. As efficient as it may sound, the snake tool can damage your pipes, when not used properly. Moreover, it has a very limited reach, making it impossible to reach tricky areas. If this doesn’t work out, here is the next tip.

3. Pipe cleaning

This is a messy yet highly effective process. First, put an empty bucket under the U-shaped pipe of your sink. Then lose the slip nuts of both sides of the pipe using a plumber wrench. Once you remove the trap, turn it upside down to empty the contents in the bucket.

Now comes the messy part. Start cleaning the debris inside the pipes using an old toothbrush to remove gunk and grease. Rinse the trap and put it back.

4. Hydro Jetting

If nothing above works, then Hydro Jetting is the only solution for you. Remember, it is not a DIY project and conducted only by an experienced blocked drain plumber in Canberra. In this process, the plumber uses highly pressurized water to clean up grease, sludge and all types of tough blockers from the drain. The process is environment-friendly, as it doesn’t involve any kind of chemicals.

Before hydro jetting, your repair contractor will conduct a CCTV inspection, ensuring the pipe is not collapsed. If collapsed, replacing them remains the only solution.

If it’s clogged, then the plumber will insert a pipe (comprising a nozzle and a hose) in the drainage system. Whenever the pipe hits an obstruction, the jetting system starts shooting pressurized water. It will break the debris and washes away the build-up completely. Again, in case you’re not sure, it’s better to call one of the best Canberra blocked drains services to do the job.

In this regard, Oxy Plumbing Services is known for clearing blocked drains in Canberra without burning pockets. It offers same-day service and is emergency-ready 24/7. It has a pool of skilled professionals who are very good at their job and are fully licensed to offer quality service.

Previous post Some Guide About Plumbing
Next post Best Interstate/Nuss Removalists in Sydney

Leave a Reply

Your email address will not be published. Required fields are marked *